SL 107

Lock with deadbolt and additional latch (without follower)

The SL 107 lock is equipped with deadbolt, latchbolt and an auxiliary latch. It is pre-equipped for euro profile cylinders. In the standard corridor side locking version, the locks have a mechanical locking status indication on the cylinder side.

Functional description

The profile cylinder key is inserted into the profile cylinder. The bolt is withdrawn with the key via a tour (360° turn). The additional latch lock with its upper profile cylinder is active.

The additional latch is withdrawn with the upper profile cylinder via a 90° turn. The door can be opened. The profile cylinder key is turned back to its original position and removed. The additional latch comes out again and is in latch position.

The door is being closed. The auxiliary latch locks the bolt latch when the door is slammed shut. The bolt is locked again via the lower personnel profile cylinder key by means of a tour (360° turn). The key is removed.

The door is completely locked.

Features

Application areas

The type SL 107 is designed for workroom or administration doors. The lock has two separate locking elements. The deadbolt is closed with the lower staff profile cylinder, the smaller additional latch via the upper profile cylinder. The additional latch cannot be operated via the staff profile cylinder. Thus, for example, a four-eye principle can be realised. The lock type is used e.g. in workrooms rented by companies in the facility.

Overview

designed for workroom and administration doors
Four-eyes principle
Operation with two different profile cylinders

Product locations

Passage door
Technical room

Mobiler Select

Technical details

Options

Accessories

Technical details

Dimensions: (LxWxH)	200 x 22 x 220 mm
Forend dimension: (LxWxH)	280 x 30 x 4 mm
Bolt throw:	20 mm
Latch bolt throw:	14 mm
Bolt material:	Stainless steel casting
Latch bolt material:	Stainless steel casting
Latch bolt finishing:	sliding coated
Lock case material:	Stainless steel
Finishing:	matt
Weight:	3,0 kg
pre-equipped for:	Euro profile cylinders
mechanically re-codable:	non
mechanical bolt position indicator:	yes, one-sided
max. side load bolt forces:	30 kN
max. side load latch bolt forces:	10 kN
max. end load bolt counterforce:	6 kN
Number of audited locking operations:	500,000
Environmental class:	IP65
Operating temperature:	-40°C to +65°C
Storage temperature:	-40°C to +65°C
Relative humidity:	95% non condensing

Options

The following equipment options are available for lock type SL 107:

DR | DIN direction: right hand
DL | DIN direction: left hand
OA | Opening direction: outward
OE | Opening direction: inward
SK | Special forend: angular
KB | Locking mechanism interlock (energised locked) and query of the lock states with conv. I/O contacts
BB | Locking mechanism interlock (energised locked) and query of the lock states with BUS contacts
CO | Connection for conventional I/O contacts (Dry contacts)
CB | Connection for BUS control
MK | Magnet in latch: front side
AS | Removal barrier
PS | Production lock (dummy lock without tumbler lock mechanism)
RI | Bolt position indicator: one-sided inverse

DR | DIN direction: right hand

If the hinges are on the right side of the door, it is the "DIN right" door opening.

Configurable options

DIN direction: right
DIN direction: left

DL | DIN direction: left hand

If the hinges are on the left side of the door, it is the "DIN left" door opening.

Configurable options

DIN direction: right
DIN direction: left

OA | Opening direction: outward

Required specification for one-sided closing locks with deadbolt latch or deadbolt and latch. This applies e.g. to lock types HSL 102 and 104 with feature S1.

OE | Opening direction: inward

Required specification for one-sided closing locks with deadbolt latch or deadbolt and latch. This applies e.g. to lock types HSL 102 and 104 with feature S1.

SK | Special forend: angular

The forend is square at both ends and not round.

Configurable options

Standard forend: round
Special forend: angular
Special forend: extra wide
Special forend: extra long

KB | Locking mechanism interlock (energised locked) and query of the lock states with conv. I/O contacts

The mechanical locking mechanism can be interlocked via conventional I/O contacts. Locking with the HSL key is not possible in this state. In addition, various lock states can be signalled:

Bolt extended / retracted
Lock / door in frame
Interlock active / inactive

Configurable options

Locking mechanism interlock (energised locked) and status query of the lock states with conv. I/O contacts
Locking mechanism interlock (de-energised locked) and status query of the lock states with conv. I/O contacts
Locking mechanism interlock (energised locked) and status query of the lock states with Bus contacts
Locking mechanism interlock (de-energised locked) and status query of the lock states with Bus contacts

BB | Locking mechanism interlock (energised locked) and query of the lock states with BUS contacts

The mechanical locking mechanism can be interlocked via BUS contacts. Locking with the HSL key is not possible in this state. In addition, various lock states can be signalled:

Bolt extended / retracted
Lock / door in frame
Interlock active / inactive

Configurable options

Locking mechanism interlock (energised locked) and status query of the lock states with conv. I/O contacts
Locking mechanism interlock (de-energised locked) and status query of the lock states with conv. I/O contacts
Locking mechanism interlock (energised locked) and status query of the lock states with BUS contacts
Locking mechanism interlock (de-energised locked) and status query of the lock states with BUS contacts

CO | Connection for conventional I/O contacts (Dry contacts)

The lock has floating contacts (Dry Contact) for connection to PLC controls or a STUV door control. Large variety of I/O devices available for almost all applications.

with floating contacts (Dry Contact)

CB | Connection for BUS control

The lock has a BUS connection. BUS (Binary Unit System) is a data transmission system for the standardised connection of decentrally arranged devices, locks and readers, the so-called bus participants. The line-saving basic principle is that all bus participants can be connected to one bus line and exchange signals for opening, closing, signalling and monitoring on this line.

Benefits

Flexibility: If changes need to be made to the door control functions, there is no need to reinstall, only to reprogram
Simultaneous use of information: Information from one detector can be used in many places (e.g. opening of a detention room, simultaneous switching on or off of the detention room lighting, signalling of the open door via a signal light)

MK | Magnet in latch: front side

With a reed contact (provided by the customer) in the frame, this feature enables the electronic evaluation of the locking status of the door (signal: bolt locked and door in frame). The two magnets are visible on the front side of the bolt.

Configurable options

Bolt without magnet
Bolt with bar magnet
Latchbolt with magnet

AS | Removal barrier

The removal barrier prevents unauthorised removal of the lock when the door is open. The lock can only be removed when the locking elements are locked. Ergo, the double-bit key is absolutely necessary.

PS | Production lock (dummy lock without tumbler lock mechanism)

Dummy lock available for door production without security features. The production lock will be charged. After a faultless return (inspection by STUV Prison Solutions), the amount minus shipping costs will be refunded or charged.

RI | Bolt position indicator: one-sided inverse

With the "inverse" equipment option, the indicator is in the opposite direction to the standard, i.e. when the bolt is closed, the indicator is retracted. Tightening torque of the locking status indicator: Ma= 6 Nm

For locks used without bolt position indicator, there is no drilling in the door leaf.

Configurable options